Director Series Temperature Control Modules

Director Series Product Description

The Director Series Temperature Control Module delivers full temperature control with unmatched
reliability.

Director Series Applications

The Director Series Temperature Control Units is ideal for all Jacketed Vessel applications including: Product Mixings, Chemical Reactions, Batch Distillations, Crystallizations, Liquid/Liquid Extractions, Polymerizations, Solids Dissolutions, Jacketed Blenders, Dryers and Extruders.

Director Series Features

The Temperature Control unit features the exclusive use of quality equipment, including: 

• Speck Magnetic Drive Seal-Less Pump
• Copeland Hermetic Scroll Compressor
• Partlow Temperature Indicating Controller with Carel Single Input PLC with Auto-Tune Feature
• A.S.M.E. Coded Single-Circuit Stainless Steel Brazed Plate Style Evaporator

The control system for the Director Series TCM utilizes a CompactLogix L31 PLC. The I/O hardware is local to the system, and powered from system. The operator interface, PanelView Plus 400 series
communicates with the processor via DF1 protocol using a serial cable.

The standard design also features:

• Single Loop or Cascade Control with General Duty or Explosion Proof Classification
• Stainless Steel Construction
• Electric Immersion Heaters rated from 6 to 160kW, low watt density design, flange mounted
• Suction Discharge Service Valves, Crank Case Heater
• Jacket Delivery Pressure Control
• Operates at elevated temperature with crankcase regulator
• ½”NPT or later water connections located on same side as process connections
• Expansion Valve, Liquid Line Solenoid and Shut-Off Valve
• Sight Glass/Moisture Indicator, Core-Type Filter/Dryer
• Electronic Modulating Hot Gas By-Pass

Director Series Advantages

• Each unit is designed to maximize the productivity of your process.
• Environmentally friendly refrigerant.
• PLC Control, Data Logging & Trending Software, Self Tuning for Accuracy ±1°C
• VFD adjusts flow and automatically manages supply pressure

Director Series Specifications

• Temperature range from -110ºF (-80ºC) to 545ºF (285ºC)
• Available in sizes for 20 liters to 500 gallon reactors

** psi calculated @ 68ºF (20°C)
* Optional feature
***Compressor capacity
Compensate for ambient losses and pump motor added heat

Options

Optional PC Control, Data Logging & Trending Screens