Solutions Ahead Blog

    4 Reasons why Reglassing is a “Spooktacular” Investment

    Posted by Jennifer Mayo

    Oct 29, 2015 12:00:00 PM

    Reactor in a graveyardThe cool, crisp, October air coupled with the beautiful fall foliage can make this one of the loveliest times of year (that is, if you are fortunate to live in an area that offers the splendors of the season).  With Halloween just around the corner, autumn is also the best time of year for people to enjoy a good fright. Whether it’s watching classic horror movies where victims repeatedly make the same common senseless, life-threatening mistakes (What are you doing?!  Don’t go back in the house!!!) or standing at your front door for hours on end doling out candy to dozens of little girls all dressed as a certain “frozen” snow queen, everyone has a different idea as to what is scary (you might be surprised just how scary the latter can be).  So when you look at the image above you may have a different reaction than I do.

    Well, are you terrified?  Does it send a shiver down your spine to see this decrepit looking vessel half buried in a dark, creepy cemetery?  Frankly, I am horrified…horrified that someone would think this reactor is as good as dead and should be laid to rest.  Here at De Dietrich Process Systems we believe there is no R.I.P. for a vessel like this; instead we see this as an opportunity for refurbishment, and you should too!

    The vessel shown above is actually a reactor that was sent to us by a customer for reglassing.  Here is another “before picture” without any Photoshop effects, taken during the reglass evaluation at our Corpus Christi, Texas plant:

     

    Reactor Evaluation for Reglassing

     

    This image may even look familiar to you if you have old, worn or damaged glass-lined equipment currently in your facility.  If not, this is an example of what can happen to a reactor that has suffered from extremely harsh working conditions including corrosion caused by chemical attack, environmental effects such as erosion and oxidation, and fractures to the glass lining due to mechanical stresses.  While it’s certainly not picture perfect, upon further inspection of this vessel, DDPS actually assessed this reactor as being a great candidate for our reglass service. 

    If reglassing is a new technology to you, check out our reglass web page or read this post that will familiarize you with the process. 

    All caught up or already an expert on the subject?  Great!  Now we can talk about why reglassing is such a worthwhile investment, or in honor of keeping with the Halloween theme for this week, why it is simply “spooktacular”:

    1. It's Faster

    Fabricating a glass-lined vessel is an intricate process involving many steps that take a considerable amount of skill and time to complete (click here if you’d like to learn more about how glass-lined vessels are made).  Due to the variety of sizes and specifications such as nozzle locations, glass-lined equipment manufacturers typically don’t keep a large inventory of stock vessels.  Because vessels are manufactured on demand, the order process can take months from the time an order is placed to the time the vessel is delivered and installed onsite.  Reglassing, on the other hand, offers a turnaround time that can be measured in weeks versus months since the framework or “skeleton” of the unit already exists.  And take it from us, while it may take a customer some time making a purchasing decision, once the contract is signed they usually would like delivery to be “yesterday”, so anything that shortens the delivery time is advantageous to the buyer. 

     

    2. It’s “Like New”

    A vessel that is reglassed undergoes the same glassing procedure as a new vessel.  The refurbishment process to the steel substrate of an existing vessel is so meticulous that if you were to put a brand new vessel next to the refurbished one you wouldn’t be able to tell the difference.  Why is that?  Because essentially, a reglassed vessel is the same as exact quality as a brand new one.  So much so that most glass-lined equipment manufacturers (including De Dietrich Process Systems) will provide a warranty for a reglassed vessel that is identical to the standard warranty that comes with new vessels.  If you have any reservations about reglassing from the standpoint of it resulting in a second-class piece of equipment in terms of quality, you can rest assured that is a complete misconception.  Refurbished units are just as good as new ones. 

     

    3. It's Cost Effective

    With reglassing, you are using the frame of an existing vessel, and that saves on the cost of steel as well as the labor needed to build the vessel.  Less materials and work equates to substantial price cuts – as much as 50% off the list price of a new vessel.  Considering today’s most common-sized reactors, that would mean reglassing can provide a 4,000 gallon vessel at approximately the cost of a new 2,000 gallon vessel.  Rarely is there a company that is not looking to save money wherever they can, so this is definitely a good selling point if you are trying to win the support of your plant manager.

    Reglassing is also cost effective in terms of cash flow.  Many companies find reglassing, which is considered a maintenance budget expenditure, preferable to a new capital expenditure.  Capital spending is usually more difficult to get approved too so it’s often less of a hassle for you to get a purchasing order generated for reglass service. 

     

    4. It's Environmentally Friendly

    In a world where everyone is continually taking more effort to reduce waste through recycling and repurposing materials, reglassing is a great way to minimize your company’s carbon footprint (not to mention, this environmental consciousness pairs perfectly with a company’s objective to minimize capital costs).  Reactors and tanks may not be buried in graveyards like we depicted above, but far too many vessels prematurely end up in a junkyard.    But how can you tell if your vessel is a reglass contender or if it is beyond repair?  If you are unsure, a qualified service technician can inspect it for you. 

     

    Instead of throwing out your vessel and buying a brand new one, you can actually refurbish your existing one and restore it to “like new” condition at a fraction of the cost.  How amazing is that?!  So if any of your equipment looks like the image at the beginning of this post, fear not.  It has potential to look like this:

    Refurbished reactor

    Or like this, if you want to upgrade to a HemiCoil jacket (reglassing is the time to think about any additional upgrades you’d like to include in your vessel’s refurbishment):

    Refurbished jacketed reactor

    De Dietrich Process Systems offers an affordable reglass service on our own vessels as well as on competitors’ equipment.  Even if you’re unsure if your equipment qualifies for reglassing, it’s an affordable solution worth looking into.  For a complimentary quote, fill out our Return Equipment Questionnaire to provide us with more information about your equipment so we can better assess if this is an economical choice for you to consider.

    Optimizing the Glass-Lined Reactor eBook download

     

          

    Topics: Reactor, glass-lined equipment, process optimization, refurbishment, reglassing